| Amplifier Section Output Power |
200W RMS per channel @ 8 Ω, 20Hz – 20kHz |
| Amplifier Section Damping Factor |
>400 @ 20Hz, referred to 8 Ω |
| Amplifier Section Frequency Response |
20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB |
| Amplifier Section Signal-to-Noise Ratio |
>98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting |
| Amplifier Section Voltage Gain |
40.7dB (maximum volume setting) |
| Amplifier Section Total Harmonic Distortion |
<0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω |
| Preamplifier (Analog) Input Impedance |
>45k Ω (RCA & XLR) |
| Preamplifier (Analog) Input Overload |
>5.5V RMS (RCA & XLR) |
| Preamplifier (Digital) Sample Rates/Bit Depth |
PCM 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD Native, single- and double-speed |
| Analog Audio Connectors |
3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick) |
| Digital Audio Connectors |
1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B) |
| Control Connectors |
1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector) |
| Mains Voltage |
100V AC, 115V AC, or 230V AC (factory-set) |
| Power Consumption |
Maximum 1000W (power on) |
| Unit Dimensions (H x W x D) |
6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm) |
| Packaging Dimensions (H x W x D) |
19" (483mm) x 26" (660mm) x 26" (660mm) |
| Weight |
72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging |
